×
First posts must be approved (25 Oct 2018)

Due to the unwelcome increase in the number of spam posts on the site it is now required for everyone's first post to be approved by a moderator.

Read More...

emo need help figuring out 13" wheels for a CN21S

More
21 Nov 2015 04:37 #25367

I am trying to figure out the offset, bolt pattern, and width I need for 13" wheels for a CN21S (1990 Alto Works I.E.) . If you can help me out that would be great :D

would these work?

Last Edit: 21 Nov 2015 04:59 by TheGoat Eater.

Please Log in or Create an account to join the conversation.

More
21 Nov 2015 09:41 #25368

no idea mysefl...............BUT....... from this thread Aaran did want these for his Alto......
www.kkitp.com/index.php/forums?view=topic&catid=44&id=17602

sitting in my garage are 4x 14" Panasports ( Minilite replica thingy's) 4 X100 6J ET38 60mm centre bore, no tyres, refurbed although 1 may need doing again due to the accident damage from here, from memory a chip on lip?......
www.kkitp.com/index.php/forums?view=topic&catid=44&id=17812

Please Log in or Create an account to join the conversation.

More
04 May 2016 11:53 #25996

It does say on the back of the wheel, it is different to any HA chassis code
You're really looking for CR/CN details
I believe, but don't quote me that my CR were 4x104.3 and HA is 4x100
I managed to get some wheels from yahoo auctions
I have three CR wheels left, ;)
if you ever need spares I have a lot of CR stuff as someone wrote mine off
And HA stuff from an unfinished project, ever want any mods, give me a shout

Please Log in or Create an account to join the conversation.

More
19 Aug 2016 17:36 #26256

C chassis Alto Works will use 4x114.3 wheels and H Chassis ones will use 4x100 wheels.

There are lots to choose from for both as many Hondas and other smaller cars in the 80s-90s used 4x100 and older Toyota/Nissan as well as others used 4x114.3 such as for a AE86.

It is easier to find some OEM wheels off another car to fit or get some aftermarket ones from Japan.

Please Log in or Create an account to join the conversation.

Moderators: TADOAdam Kenneydazran
Time to create page: 0.278 seconds
Powered by Kunena Forum