×
First posts must be approved (25 Oct 2018)

Due to the unwelcome increase in the number of spam posts on the site it is now required for everyone's first post to be approved by a moderator.

Read More...

emo Turbo

More
13 Apr 2014 20:57 #21215

The rhf3/4 hybrid isn't off another car, it is 2 turbo's put together.

As you have the 3 cylinder engine which I assume would be the EF-RL you should be able to do the corsa hybrid yourself as it only works with the EF-RL which has the VQ29 turbo, not the VQ29 from the JB-JL. Read skattrd's thread here: kkitp.com/3/index.php/forum3?view=topic&...imitstart=0&start=30 it would be the cheapest way to get a functioning turbo. However, that hybrid won't really give you much of a performance gain if that's what you're after.

Please Log in or Create an account to join the conversation.

More
21 Apr 2014 06:37 #21269

Hybrid turbo like rhf3/4 mostly can give u around 90whp... a turbo from 6a12 mitsu eterna twinturbo td025 most easyway better than the hybrid..
This my opinion B) B)

Please Log in or Create an account to join the conversation.

More
23 Apr 2014 11:45 #21295

I've been doing some research and been trying find the ihi rhf3, but there's a big list of what cars they go in, but can I only get the one off a corsa b 1.5? Or aslong as it's the ihi rhf3 it doesn't matter?

Please Log in or Create an account to join the conversation.

More
23 Apr 2014 18:49 #21301

its got to be the ihi rhf3 vibg turbo of the 1.5 Isuzu engine that was fitted to the first 1.5 corsas before GM fitted there own engine , its the only turbo that will fit. but you will have remove the turbine shaft (exhaust comp wheel is part of it) out the standard turbo and swap it for the shaft in the corsa turbo and use the corsa inlet turbine and use the standard housing and bolts it al together and it will fit, you will also need the corsa water feed block that mounts to the turbo as they are slightly different and the standard turbo 1 wont fit

Last Edit: 23 Apr 2014 18:50 by superspat.
The following user(s) said Thank You: JDMjoe

Please Log in or Create an account to join the conversation.

Moderators: TADOAdam Kenneydazran
Time to create page: 0.400 seconds
Powered by Kunena Forum